Structural Fitter or Shipfitter

  • Location: Mobile, Alabama
  • Type: Contract
  • Job #1149
  • Salary: $28.50

FirstFour is looking for Steel Structural Fitters to join our team at a major shipyard in Mobile, Alabama, Day Shift, 50 hours per week 

COMPENSATION: $28.50 per hour

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • Pass approved A-Class Fitter Test.
  • 3 years' experience as a Structural or Ship Fitter.  
  • Must demonstrate ability to interpret and work from construction drawings, job specifications, instruction manuals, manufacturer’s handbooks, change order, and contract specifications.
  • Thorough knowledge of equipment, work processes and techniques used in measuring, and fitting of aluminum components, modules and vessels.
  • Ability to add, subtract, multiply, divide, and measure using the metric system.
  • Knowledge of shipyard terminology such as general ship structure and vessel layout.
  • Knowledge of edge preparation and weld joint details.
  • Advanced working knowledge of engineering drawings and sketches.
  • Drug screen and background check required.

B Class Pipe Welder

  • Location: Mobile, Alabama
  • Type: Contract
  • Job #1119
  • Salary: $21.70 Per Hour

B Class Pipe Welder 

  • The individual must demonstrate ability to interpret job specifications and perform work on marine vessels.

ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES

  • Read and interpret basic drawings and weld symbols.
  • Pass TIG weld test procedures in 6G position.
  • Pass TIG weld test procedure for aluminum pipe.
  • All work is performed inside a shop / warehouse environment.  
  • 2 years' experience in similar role at comparative employer.
  • Pass the “B” Class pipe welder tests: with 6G certifications for copper nickel and stainless steel.
  • Must be able to pass a pre-employment drug test and background check.  
  • Pay is $21.70 per hour.  

Lumber Yard Associates

  • Location: Daphne, Alabama
  • Type: Contract
  • Job #1093
  • Salary: $15.00 Per Hour

Client in Daphne, AL is seeking entry level labor candidates to join their team.  

  • Pay is $15 per hour.
  • 50 hours per week – Potential earnings $825 per week.
  • Long term position for the right candidate.
  • Labor work in lumber yard 
  • Must be able to lift 50lbs throughout your shift.
  • Loading and unloading trucks.
  • Must be able to pass a drug test.

A Class Steel Structural Fitter

  • Location: Mobile, Alabama
  • Type: Contract
  • Job #991
  • Salary: $28.50

FirstFour is looking for Steel Structural Fitters to join our team at a major shipyard in Mobile, Alabama, Day Shift, 50 hours per week. 

COMPENSATION: $28.50 per hour

RESPONSIBILITIES:

  • Technically proficient in tasks, work processes, and equipment operation.
  • Accountable for completion of daily work assignments including the completion and signatures for work completion and quality.
  • Creates a working environment compliant with quality, safety, environmental, and health regulations and policies.
  • Rigs plates and equipment safely.
  • Maintains cleanliness and organization on assigned job sites.
  • Accountable for completion of daily work assignments including the completion and signatures for work completion and quality.
  • Performs safe and effective use of craft related tools and equipment, including but not limited to: millers, sanders, grinders, burr motors, band saws, skill saws, saws all, come along and chain falls etc.
  • Obtain GMAW ABS ‘B’ Class Weld Certification for aluminum applications.
  • Performs basic layout of plates, materials and weldments using basic engineering sketches, drawings, and diagrams with minimal supervision.
  • Performs ship fitting functions such as but not limited to fit up of structure, cutting, sniping, sanding, grinding, prepping, tacking and the fit up of plates with minimum supervision.
  • Performs fitting operations with limited supervision using standard ship fitting equipment to accomplish fabrication and ship repair duties.
  • Monitors working environment for compliance with quality, safety, environmental and health regulations.
  • Must be willing to work with and train lower-skilled workers.
  • May be assigned to work any shift.
  • May be assigned additional tasks including outside the craft as required.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • Pass approved A-Class Fitter Test.
  • Must demonstrate ability to interpret and work from construction drawings, job specifications, instruction manuals, manufacturer’s handbooks, change order, and contract specifications.
  • Thorough knowledge of equipment, work processes and techniques used in measuring, and fitting of aluminum components, modules and vessels.
  • Ability to add, subtract, multiply, divide, and measure using the metric system.
  • Knowledge of shipyard terminology such as general ship structure and vessel layout.
  • Knowledge of edge preparation and weld joint details.
  • Advanced working knowledge of engineering drawings and sketches.
  • Drug screen and background check required.

A Class Steel Structural Welder

  • Location: Mobile, Alabama
  • Type: Contract
  • Job #990
  • Salary: $0.00 - $28.50

FirstFour is looking for Aluminum Welders to join our team at a major shipyard in Mobile, Alabama.

COMPENSATION: $28.50 per hour

RESPONSIBILITIES:

  • Single-pass and multi-pass fillets in all positions, for all joint and material thickness configurations
  • Multi-pass full penetration joint details, for all joint and material thickness configurations
  • MIG Welding 100% Argon – 2G, 3G, and 4G to xray standard

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • High School Diploma/GED OR two years of maritime experience.
  • Ability to weld in uncomfortable positions where applicable.
  • Minimum of 3 years of GMAW MIG welding experience at a comparable employer.
  • Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details.
  • Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel.
  • Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm.
  • Demonstrated ability to weld gusset toe and wraps with minimal blending required.
  • Demonstrated ability to weld frame wraps and terminations with minimal blending required.
  • Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required.
  • Demonstrated ability to weld into corners / vertical intersections with minimal blending required.
  • Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision.
  • Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects.
  • Demonstrated ability to weld continuously for 400mm.
  • Drug screen and background check required.

A Class Aluminum Welder

  • Location: Mobile, Alabama
  • Type: Contract
  • Job #870
  • Salary: $0.00 - $28.50

FirstFour is looking for Aluminum Welders to join our team at a major shipyard in Mobile, Alabama.

COMPENSATION: $28.50 per hour

RESPONSIBILITIES:

  • Single-pass and multi-pass fillets in all positions, for all joint and material thickness configurations
  • Multi-pass full penetration joint details, for all joint and material thickness configurations

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • High School Diploma/GED OR two years of maritime experience.
  • Ability to weld in uncomfortable positions where applicable.
  • Minimum of  2 years of GMAW MIG aluminum welding experience at a comparable employer.
  • Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details.
  • Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel.
  • Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm.
  • Demonstrated ability to weld gusset toe and wraps with minimal blending required.
  • Demonstrated ability to weld frame wraps and terminations with minimal blending required.
  • Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required.
  • Demonstrated ability to weld into corners / vertical intersections with minimal blending required.
  • Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision.
  • Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects.
  • Demonstrated ability to weld continuously for 400mm.
  • Drug screen and background check required.

A Class Pipe Welder

  • Location: Mobile, Alabama
  • Type: Contract
  • Job #862
  • Salary: $35.00 Per Hour

FirstFour is looking for Pipe Welders to join our team at a major shipyard in Mobile, Alabama.

COMPENSATION: $35.00 per hour

RESPONSIBILITIES:

  • Read and interpret blueprints / basic drawings to understand weld symbols.
  • Work with a team of Pipe Welders and Fitters to carry out tasks and deliver vessel on time.
  • Have the ability to work in confined spaces.
  • Repair and New Construction opportunities available.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • Pass all approved A-Class Pipe Welder Tests.
  • Must have a minimum of 5 year's of experience as a marine Pipe Welder.
  • Must be experienced with Tig and special metals.
  • Drug screen and background check required.

A Class Pipe Fitter

  • Location: Mobile, Alabama
  • Type: Contract
  • Job #861
  • Salary: $0.00 - $28.50

FirstFour is looking for Pipe Fitters to join our team at a major shipyard in Mobile, Alabama.

COMPENSATION: $28.50 per hour

RESPONSIBILITIES:

  • Read and interpret blueprints to determine layouts.
  • Cut openings for pipes into modules / vessel using hand tools.
  • Must be able to measure, cut, thread, bend, and install pipe.
  • Clean and maintain pipe units and fittings and flush system.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

  • Pass approved A-Class Pipe Fitter Test.
  • Must have a minimum of 5 year's of experience as a marine Pipe Fitter.
  • Must be able to read and understand blueprints, a tape measure, and know/understand all necessary formulas to carry out your work.
  • Drug screen and background check required.

Stick Welder

  • Location: Jefferson, Louisiana
  • Type: Contract
  • Job #519

Welder – $22.00 / hr.

Working in the barge repair facility in the New Orleans area, the Welder will support the repair operations of this facility from 7:00am until 5:30pm Monday thru Thursday, and 7:00am until 3:30pm on Friday.  Candidates should have 3 years or more experience stick welding in a shipyard environment.

All approved candidates will be required to take and pass a stick welding test with 6011 Rod  in the vertical / overhead position on mild steel with one pass root and cap, no grinder.

Additional duties include:

  • Weld components according to blueprints 
  • Verify components welded meet company tolerances
  • Daily setup and equipment for each task
  • Grind and finish all welds
  • Perform daily maintenance and upkeep to assigned work areas
  • Attend and participate in daily safety meetings and promote a safe work environment
  • Perform assigned tasks given by shift supervisor

Warehouse Person / CSR

  • Location: Pensacola
  • Type: Contract
  • Job #514
  • Salary: $19.00 - $20.00

Our customer in Pensacola, FL is looking for an
Industrial CSR / Warehouse representative to assist with all facets of the company’s needs.

Summary

This role will play a critical role in both storing and distributing materials, tools, equipment, and products in an environment that is NOT climate controlled, as well as assisting with selling products to businesses and individuals over the telephone or at the sales counter.

Duties / Responsibilities

– Reads production schedule, customer order, work order, and shipping order to determine items to be gathered and distributed.

– Moves materials and items from receiving to production or storage areas.

– Sorts materials on shelves and bins.

-Assembles custom orders from stock and places on pallets for shipping department.

– Opens bales, crates, and other containers.

-Records amounts of materials or items received or distributed.

– Weights or counts items for distribution.

– Uses computer to enter and maintain inventory records.

– Compiles worksheets and tickets from customer specs.

– Prepares parcels for mailing.

– Must be comfortable making and receiving calls from customers.

– Handles inbound sales leads and coverts calls to sales.

– Builds and maintains customer relationships.

– Investigate and resolve customer problems with parts and deliveries.
– Pay is $19.00 to $20.00 per hour DOE
– Temp to Perm Opportunity 
– High School Diploma or GED Required
– Must be able to pass a pre-employment drug test and b 7-year background check.